FPGA¶
This section describes all information required to use the leguan board in FPGA-mode.
Getting Started¶
To use the FPGA make sure that you put your leguan board either in the FPGA with LCD
or the FPGA without LCD
mode. You should now see the BFH Blaster
USB-device in your device manager.
Usage¶
You can either use the FPGA by using logisim-evolution or directly by describing your system in VHDL
and using the Intel Quartus Lite Edition software to generate a bit-stream and download it to the FPGA.
Resources¶
There are different peripherals connected to the FPGA. In the sub-menus of this section each of them is described with a small description how to instantiate them in VHDL.