Firmware update guide

This guides you through the steps of updating firmware on the leguan board.

Steps:

• connect Leguan to your pc

• enter BIOS mode on leguan

• update firmware

Entering BIOS on leguan board

To enter the BIOS-mode on leguan board follow tese steps.

• press and hold “default mode” button

• press “reset” button and release again

• release “default mode” button You should now see the leguan BIOS screen displaying some basic checks and other information. Additionally you should now see a new USB-device on your host PC with idVendor=dead idProduct=beef. On a linux system you can use the command “lsusb” to check this.

Updating firmware

In Construction